Stevens Chemical Company
Finding Solutions For All Your Cleaning Needs
Home
Up
New Products
Products
Internet Specials
Cleaning Tips
Links

 

 

 

 

Floor Care
You can m
op everywhere with
Green (Light Duty) solution without doing any damage to your floor finish. Mop with the Green (Light Duty) for restrooms, kitchen, ice Melt or salt residue floor areas, and  food service areas.

Auto Scrub with
Green (Light Duty) or Grout Safe(1/2oz per gallon) except in very heavily-soiled areas. Renovate Tile Surfaces with  Red (Heavy Duty), Mineral Shock or Grout Safe.. Pre-spray the surface, and let sit for five minutes, then use a rotary or cylinder scrubber and rinse.

Kitchen and Rest Room floors may require mopping with Red solution periodically to retain the renovated condition. However, the Green solution will generally keep the floor in good condition once it has been renovated.

Glass, Mirrors & Stainless Steel and General Cleaning
The Green (Light Duty) will clean windows, mirrors and stainless steel effectively by wipe down or squeegee. The Green will not streak. You should note that there is no alcohol in this system...so it will dry a little slower than standard glass cleaners will. It is important to understand that H2Orange2 in the Green (Light Duty) does not have to be dried as completely as other window cleaners. You can leave the fog on the window and still not get streaks.

General Wipe Down
Use the Green (Light Duty) for General wipe down of walls, doors, office equipment, desks, etc

Use the Red (Heavy Duty) (spray on a give it a minute to soak) for heavier situations.

The Red solution does not require rinsing when it is wiped up with a paper towel or a rag. A quick way to clean large areas is for you to spray the Red (Heavy Duty) let it sit for 5 minutes, and then use a microfiber cleaning cloth with clean water and wipe down the surface and let it air dry. You will see no residue left behind and you have sanitized the surface.

Use Ultimate  for scuff marks, ink, crayon, makeup and heavy soil build up, or when the Red solution cleans too slowly.

General Method for Selecting the Proper Solution
If a particular concentration for a specific application does not work effectively, just go to the next strongest solution. None of these dilutions will harm any surface that water will not harm. Only use
Mineral Shock, Grout Safe or Ultimate when all else fail.